Tabateq | Industrial Wireless Solutions |Industry

Tabateq | Industrial Wireless Solutions | E_105U-G_600

Elpro 105U-G-MD1: Modbus RTU

SKU: UCE-105U-G-MD1

The Elpro 105U-G-MD1 can be configured for Modbus master interface, Modbus slave, or DF1. It has two serial connections – RS232 and RS485, on the bottom end plate of the module.

DESCRIPTION

Wireless gateways provide connectivity between similar/dissimilar industrial databuses and/or field device I/O (e.g. Ethernet/IP to Profibus, etc.) Connected via RS232/485 and Ethernet, register allocated data-bus values are transmitted/received by radio to and from devices such as PLC’s, HMI’s, etc.

Flexible by design, Elpro’s 105U-G series can multi-hop repeat five times, support a variety of industrial protocols and when combined with Elpro’s 1115S and/or I/O products, can create simple to complex I/O products, can create simple to complex I/O networks supporting differing protocols.

Elpro 105U-G-MD1

Modbus RTU (Master & Slave), DF1
Up to 4300 I/O points: analog and/or discrete
Modbus – RS232/485: 300-19200bps
DF1 (full duplex) – RS232: 300-19200bps

FEATURES

AC/DC/battery power options, UPS battery charger and solar regulator
Interconnects similar/dissimilar industrial protocols (Master/Slave, Slave/Slave, Master/Master) connecting to databus at full speed (e.g. 12 Mbps Profibus)
Eight on-board digital I/O which can be configured as either inputs or outputs. Additional internal I/O points include low/normal supply/battery voltage (analog)
Point to multi-point connectivity with forward error correction, communications integrity check with security encryption
Online read/write of register I/O, reporting of signal strength (RSSI) with diagnostics including radio path measurement and communications logging