13_section-8

415U-2-C4 Wireless I/O Gateway

SKU: UCE-415U-2-C4

The 415U-2 will be used as a long range scalable industrial wireless gateway & I/O module for reliable & secure connectivity to outstations.

Integration to PLC & SCADA is done seamlessly via Modbus TCP/RTU. This can be achieved without the use of third party drivers or OPC to most SCADA systems & PLC’s.

DESCRIPTION

ELPRO industrial wireless has 30 years of expertise in
solving critical industrial applications through our
extensive knowledge in wireless I/O, modem and
gateway applications. The 415U-2-C extends
communications to sensors in local, remote, and
difficult-to-reach locations.
Designed with the Condor series long-range, high data
speed wireless transceiver and standards-based native
Ethernet protocol over the air, gives 415U-2-C the
power and flexibility to perform reliably in sprawling
harsh industrial environments.
Secure. AES encryption, advanced IP filtering, multilevel
authentication, user access and change event
logging features provide the user with the tools to
ensure the highest level of data integrity and
protection against malicious attacks.
Flexible. Ethernet native support provides solutions to
connectivity challenges today and
in the future. The ELPRO 415U-2-C also provides
Ethernet and serial gateway support for industrial
protocols including Modbus TCP/RTU and
DNP3 I/O.
Reliable. The Condor series 415U-2-C ProMesh
operates reliably with the challenges of obstructed
paths by using automatic path selection and frequency
agility to allow the communications network to adapt
to changes easily with redundancy.

FEATURES

• Exceeding 140 kbps data throughput
(25 kHz channel and compression)
• Secure data protection with WPA and AES256
encryption
• Full Ethernet protocol over the air provides a
standards-based flexibility to support future and
legacy devices
• ProMesh automatic path selection and network
formation
• Internal Web dashboard for immediate view of local I/O
• Supports multiple data rates simultaneously for high
performance over short and long communication
links
• Frequency agility roaming provides reliability and
flexibility within the network architecture
• Over-the-air context-based data compression and
forward error correction provides maximum
reliability and transmission efficiency
• Redundancy modes for base, repeater, and remote
• Wireless point-to-point or multipoint I/O and
gateway functionality
• Modbus TCP and RTU I/O gateway
• DNP3 I/O gateway, including internal status registers
• Standard Ethernet bridge default to allow modem
function for external Ethernet host devices (full L2/
L3 network support)
• 340–480 MHz frequency range in just 2 models
• 10 mW to 10 W RF power configurable, license or
license-free
• Software configurable wireless channel bandwidth
supporting 6.25, 12.5, 25.0 kHz
• Integrated digital, pulse, and analog I/O
• Gather-scatter/block mapping and integrity checking
transmissions for efficient event triggered peer-topeer
I/O
• Over-the-air network diagnostics and configuration
• Expandable I/O for local alarms and inputs/outputs

  • Water and wastewater: flows, levels, pumps
  • Renewables—solar farms, wind turbines, hydro
  • Irrigation: slew gate controls, levels
  • Oil and gas networks: gas well production, lift pump
  • Environmental: storm warning, smoke stacks, filters
  • Mining infrastructure: conveyor, re-claimer, pumps